Outback Kitters F250/F350 (2017-2022) Pre Runner Bar - Outback Kitters
Outback Kitters F250/F350 (2017-2022) Pre Runner Bar - Outback Kitters
Outback Kitters 2021+ Ford F250/F350 Pre Runner Bar - Outback Kitters
Outback Kitters 2021+ Ford F250/F350 Pre Runner Bar - Outback Kitters
Outback Kitters 2021+ Ford F250/F350 Pre Runner Bar - Outback Kitters

Outback Kitters F250/F350 (2017-2022) Pre Runner Bar

Vendor: Outback Kitters
Product Type: Pre Runner Bar
SKU: OKPRFD201RL
Stock: Checking...
$4,500.00
$4,500.00
Colour: Raw - Unpainted

Have questions or need help? Our team is available to take your call on 0483 939 770.

PRE-RUNNER BAR

STRONG WHERE IT MATTERS. LIGHT WHERE IT CAN BE.

There's more than one way to build a strong bullbar.

You can keep adding steel until the front suspension starts questioning your life choices.

Or you can put the right material in the right place.

The Outback Kitters Pre Runner Bar for the 2017–2022 Ford F-250 and F-350 combines a 6mm aluminium main bar with an 8mm steel winch cradle, giving you frontal protection, recovery capability and integrated lighting without hanging unnecessary weight off the nose of the truck.

Complete with mounting brackets and supplied lightbars, the whole setup comes in at approximately 75kg.

6MM ALLOY. 8MM STEEL.

The main bar is manufactured from 6mm aluminium to keep unnecessary weight down.

Behind it, an 8mm steel winch cradle provides strength where winching and recovery loads actually demand it.

Different materials.

Different jobs.

Used where they make sense.

LIGHTING INCLUDED

Every Pre-Runner comes standard with 2 x 12" Outback Kitters Stealth Lightbars, neatly integrated into the wings of the bar.

Want to run your own?

The opening measures 850mm x 84mm.

Plenty of room to make it yours.

AIRFLOW MATTERS

Big truck. Big engine. Potentially a bloody big trailer behind it.

Cooling matters.

Large openings through the front of the Pre-Runner help maintain airflow towards the Ram's cooling package rather than putting a giant slab of bullbar in front of the radiator.

Protection in front of it. Not a lid on it.

RECOVERY READY

The Pre-Runner incorporates rated front recovery points suitable for soft shackles or D-shackles, along with the integrated 8mm steel winch cradle.

Winch clutch access is provided from underneath the vehicle.

Proper recovery equipment.

Built into the bar from the beginning.

 

BUILT FOR AUSTRALIAN CONDITIONS

The Pre-Runner Bar is built to suit ADR 69 compliance and Australian Standards, because looking tough isn't particularly useful if the engineering behind it isn't up to the job.

 

WHAT'S INCLUDED

  • 6mm aluminium Pre-Runner Bar

  • Protective lightbar hoop

  • 8mm steel winch cradle

  • Rated front recovery points

  • 2 x 12" Outback Kitters Stealth Lightbars

  • Lightbar wiring harnesses

  • Parking sensor extension harnesses

  • Provisions for 4 x factory parking sensors

  • Complete fitting hardware

Approximate total weight: 75kg including bar, mounting brackets and supplied lightbars.

OUTBACK KITTERS PRE-RUNNER BAR

LIGHT WHERE IT CAN BE.
STRONG WHERE IT NEEDS TO BE.
BUILT TO ACTUALLY USE THE TRUCK.

RECOMMENDED

  • 1x OKWHPR002 Wiring Harness for 2 x Side Lights & Optional Front Lightbar
  • 1x OKWHPR003 Wiring Harness for Lightbar Power including Fuses & Relays

RECOMMENDED WIRING HARNESSES

Grab the Wiring Harness Kit (2020-2022) made up of:

  • 6mm Alloy Bar with Protective Hoop
  • 8mm Steel Winch Cradle (Powder Coated Black)
  • RATED Front Recovery Points to 7,000kg on a single line pull
  • Machine Recovery Points suitable for Soft Shackles or D-Shackles
  • Compatible with Forward Collision Sensor
  • Large access holes for air flow / winch clutch access
  • 2 x Roadvision 13" Stealth Lightbars with Black Lens (Range: 605m at 1 Lux) 
  • Built to suit ADR 69 Compliance and Australian Standards
  • Total weight of the bar, all mounting brackets and lightbars are 75kg
  • Multiple finish options including: Raw Bar (Powder coated Winch Cradle) or Powder coated Satin Black or Texture Black
  • Includes Fitting Kit with all necessary bolts, washers and nuts
  • Made in Brisbane, Australia
  • Winches larger than the Carbon Scout Pro 15,000lb in physical dimensions will not fit.
  • The opening beneath the protective hoop measures 850mm × 84mm for customers wishing to install their own compatible light bar.

INSTALLATION

  • Installation Guide: Coming Soon
  • Estimated time: 6 hours

Related Products

Recently Viewed Products