BDS Suspension 2" Levelling Kit for Ford F150 (2021+)

SPECIFICATIONS

• Front Lift Method : Coil-Over
• Rear Lift Method : Stock
• Shocks Included : Yes
• Front Lift Height : 2"
• Rear Lift Height : 0"

RECOMMENDED TIRES AND WHEELS

(Trimming may be required)

• 35 x 12.5 with 20 x 9 and 5.5 in. Backspace

IMPORTANT NOTES

• Works with bar pin lower strut mounts. For eye-style lower strut mounts use 2009-13 model kits.
• Control arms with sensors are designed to keep the sensor arm in the stock position (the same position as the OE control arm).
• Not designed to work with trucks with CCD.
• Do NOT hit the aluminum knuckle on later model trucks with a hammer to separate the ball joint. Use the appropriate ball joint separation tool.
• For replacement ball joints, use BDS081203. The ball joint is directional and must be installed with the dot facing either inward or outward on the vehicle, otherwise, damage may occur.
• Special Service Tool 204-592 is recommended to dislodge the ball joint.
• If your vehicle has been modified with new leaf springs, the u-bolts with the Rear Spacer Block Kits may not be long enough. This lift kit is sold under the provision that the rear suspension has not yet been altered. If you need longer u-bolts, you may need to take the measurements and source some alternatives.

INSTALLATION

• Installation Guide Download
• Estimated time: 3 hours
• Difficulty: Moderate

SPECIALTY TOOLS NEEDED

• Ball Joint Separation Tool