BDS Suspension 5" Lift Kit w/ Radius Arm to suit Ford F250/F350 2023-2024

Vendor: BDS Suspension
Product Type: 5" Lift Kit
SKU: BDS2210FPE
Stock: Checking...
$13,750.00
$13,750.00
Please hurry! Only 0 left in stock
Rear Lift Options: Leaf Springs
BDS Suspension 5" Lift Kit w/ Radius Arm to suit Ford F250/F350 2023-2024

BDS Suspension 5" Lift Kit w/ Radius Arm to suit Ford F250/F350 2023-2024

$13,750.00

BDS Suspension 5" Lift Kit w/ Radius Arm to suit Ford F250/F350 2023-2024

$13,750.00
Rear Lift Options: Leaf Springs

Improve the ride on your 23-24 Ford Super Duty diesel truck with this 5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while

  • Front Lift Method : Coil Spring
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 5"
  • Rear Lift Height : 5"

(Trimming may be required)

  • 37 x 12.5 with 17 x 9 and 5 in. Backspace
  • 37 x 12.5 with 18 x 9 and 5 in. Backspace
  • 37 x 12.5 with 20 x 9 and 5 in. Backspace
  1. Vehicles with radius arm mounted ride height sensors will require BDS123303.
  2. Ford recommends the replacement of the pitman arm nut after each time it has been removed.
  3. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
  4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
  5. Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
  6. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
  7. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
  8. Installation requires a torque wrench capable of 406 ft-lbs.
  9. Vehicles with leaf spring ride height sensors must select the rear block option.

Installation Guides : Download Guide 1
Download Guide 2
Est. Install Time: 6-8 hrs
Difficulty Level : Difficult
Specialty Tools Needed : Torque Wrench, Die Grinder, Pitman Arm Puller

Related Products

Recently Viewed Products