BDS Suspension 3" Lift Kit with Radium Arms for Ford F250 (2023) - Outback Kitters
BDS 3" Lift Kit with Radium Arms for Ford F250 (2023) - Outback Kitters
BDS 3" Lift Kit with Radium Arms for Ford F250 (2023) - Outback Kitters

BDS Suspension 3" Lift Kit with Radium Arms for Ford F250 (2023+) (EOFY)

Vendor: BDS Suspension
Product Type: 3" Lift Kit
SKU: BDS2200FPE
Stock: Checking...
$11,190.00
$11,190.00
Please hurry! Only 2 left in stock

EOFY PROMOTION - ADD IN THE BDS DUAL STEERING STABILISER FOR FREE!
Click here for Ford F250 Dual Steering Stabiliser


*Discount will automatically be applied to your cart during checkout. Valid until June 30, 2025.

Level out and take your 2023 Ford Super Duty diesel powered truck with this 3-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty replacement radius arms, high strength 1-3/8 inch solid steel track bar for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

In the rear this kit utilises a high-strength fabricated lift block, longer u-bolts and a matching set of FOX Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

HD Adjustable Track Bar

Maintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3/8" solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.

FEATURES & BENEFITS

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs ride smooth through any terrain
  • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  • Adjustable solid steel track bar designed to recenter the front axle
  • Fabricated steel blocks provide level stance from front to rear
  • FOX 2.0 Performance Series shocks for maximum performance on and off-road

TYRE & WHEEL COMBINATIONS

 

  • 35 x 12.5 with 17 x 9 and 5 in. Backspace
  • 35 x 12.5 with 18 x 9 and 5 in. Backspace
  • 35 x 12.5 with 20 x 9 and 5 in. Backspace

 

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminium body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminium mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodised finish

IMPORTANT NOTES

  • This kit is not compatible with trucks equipped with radius arm mounted ride height sensors.
  • Designed for use on diesel models, but can be installed on gas trucks, will achieve additional 1/2 inch front ride height.
  • Installation requires a torque wrench capable of 406 ft-lbs.
  • Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models
  • Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
  • Trucks without top mounted overload spring will require (x4) UBT4031 available to purchase separately

INSTALLATION

Related Products

Recently Viewed Products