BDS Suspension 3" Lift Kit for Ram 1500 DT with Fox Shocks

• SPECIFICATIONS

• Front Lift Method : Coil-Over
• Rear Lift Method : Coil Springs
• Shocks Included : Yes
• Front Lift Height : 3"
• Rear Lift Height : 1.5"

TYRE & WHEEL COMBINATIONS

• 33x12.5 w/ 18x9 & 4.5-5" back spacing
• 33x12.5 w/ 20x9 & 4.5-5" back spacing
  *Trimming may be required*

IMPORTANT NOTES

1. Will not work with stock rims with a 12.50" wide tire, the tire will rub the UCA at full steering lock. If the stock rim is reinstalled it will need to be with the stock-size tire ONLY!
2. The ball joint used is 500-1134, use this for replacement purposes if a new ball joint is ever needed. The ball joint is directional and must be installed with the 'dot' facing either inward or outward on the vehicle, otherwise, damage may occur
3. Vehicles equipped with Offroad or Rebel Package will not achieve the full 3" of lift, net ride height change will be around 2" above stock.
4. If your vehicle has been modified with new leaf springs, the u-bolts with the Rear Spacer Block Kits may not be long enough. This lift kit is sold under the provision that the rear suspension has not yet been altered. If you need longer u-bolts, you may need to take the measurements and source some alternatives.

FITMENT

Suits 2019+ Ram 1500 DT Models

Will not fit Ram 1500 DS Classic models

View complete Vehicle Fitment Information

INSTALLATION

Installation Guide: Download

Estimated Time: 6 hours

Difficultly Level: Moderate

Specialty Tools Needed : Torque Wrench, Ball Joint Separation Tool