BDS Suspension 6.5" Lift Kit for 2020+ Chevy Silverado 2500 with Fox 2.5 Performance Elite Shocks - Outback Kitters
BDS 6.5" Lift Kit for 2020+ Chevy Silverado 2500 with Fox 2.5 Performance Elite Shocks - Outback Kitters
BDS 6.5" Lift Kit for 2020+ Chevy Silverado 2500 with Fox 2.5 Performance Elite Shocks - Outback Kitters

BDS Suspension 6.5" Lift Kit for 2020+ Chevy Silverado 2500 with Fox Shocks

Vendor: BDS Suspension
Product Type: 6.5" Lift Kit
SKU: BDS1823FPE
Stock: Checking...
$12,300.00
$12,300.00
BDS Suspension 6.5" Lift Kit for 2020+ Chevy Silverado 2500 with Fox 2.5 Performance Elite Shocks - Outback Kitters

BDS Suspension 6.5" Lift Kit for 2020+ Chevy Silverado 2500 with Fox Shocks

$12,300.00

BDS Suspension 6.5" Lift Kit for 2020+ Chevy Silverado 2500 with Fox Shocks

$12,300.00

Got a Chevrolet Silverado / GMC 2500 and want it to be B-I-G? Then look no further than the BDS Suspension 6.5" Lift Kit.

This BDSSuspension 6.5" Lift Kit for 2020+ Chevy Silverado / GMC 2500 / 3500 with Fox 2.5 Performance Elite Shocks is designed to deliver exceptional ground clearance and off-road capacity. It includes Fox shock technology to provide precision tuning and a smooth ride, while the adjustable DSC allows you to customize the performance of your shocks to match the terrain. With heavy-duty front coils and 6.5" of added ride height, you can take the road less travelled and stand tall with confidence.

The Fox Shocks with DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail.

This mammoth kit includes:

  • Front & Rear Fox 2.5" Remote Reservoir Performance Elite Shocks with DSC
  • Rear Spacer Block
  • High Clearance Crossmembers
  • Front Skid Plate
  • Diff Drop Kit
  • New Knuckles

SPECIFICATIONS

  • Front Lift Method : Cross-Member
  • Rear Lift Method : Block
  • Shocks Included : Yes
  • Front Lift Height : 6.5"
  • Rear Lift Height : 6"

RECOMMENDED TIRES AND WHEELS

  • 38x13.5 w/ 20x9 and 5.5-6.18" back spacing
  • 37x12.5 w/ 20x9 and 4.5-4.625" back spacing
    *Trimming may be required*

IMPORTANT NOTES

  • For DRW models, use the w/ overload rear lift option
  • Requires frame bracket modification.
  • Torsion Bar Tool required to load/unload torsion bars
  • Models with two-piece rear driveshafts will require a carrier bearing drop kit.
  • Factory 17-18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled with up to a 35x12.50 tire.
  • In some cases, vehicles used in 4WD on the highway frequently could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft.
  • Do not install this suspension system in conjunction with any type of torsion bar lift keys to achieve more than the tested 6.5" lift height.
  • Some minor trim will be required with certain wheel/tire combinations. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks. Trimming will normally include the bottom edge of the inner fender shrouds and/or the lower corner of the front bumper valance. As a rule of thumb, deeper backspacing and shorter/narrower tires will reduce/eliminate trimming required.
  • Further trimming tips are included at the end of this instruction sheet.

FITMENT

View complete Vehicle Fitment Information

INSTALLATION

Installation Guide: Download

Estimated Time: 8 hours

Difficultly Level: Moderately-Hard

Required Tools: Torsion Bar Unloading Tool

Related Products

Recently Viewed Products