BDS 4" Lift Kit for Ram 1500 DT - Outback Kitters
BDS Suspension 4" Lift Kit for Ram 1500 DT - Outback Kitters
BDS Suspension - 4" Lift Kit for Ram 1500 DT - Outback Kitters
BDS Suspension - 4" Lift Kit for Ram 1500 DT - Outback Kitters
BDS 4" Lift Kit for Ram 1500 DT - Outback Kitters

BDS Suspension 4" Lift Kit for Ram 1500 DT

Vendor: BDS Suspension
Product Type: 4" Lift Kit
SKU: BDS1757FPE
Stock: Checking...
$11,500.00
$11,500.00
Please hurry! Only 0 left in stock
Knuckle Size: Standard Bore - Factory 18/20" Wheels
BDS Suspension - 4" Lift Kit for Ram 1500 DT - Outback Kitters

BDS Suspension 4" Lift Kit for Ram 1500 DT

$11,500.00

BDS Suspension 4" Lift Kit for Ram 1500 DT

$11,500.00
Knuckle Size: Standard Bore - Factory 18/20" Wheels

Outback Kitters is proud to offer the BDS Suspension 4" Lift Kit for the Ram 1500 DT - Hubbedah. Hubbedah. Hub-be-dah!

This BDS Suspension 4" Lift Kit for Ram 1500 DT with Fox 2.5 Performance Elite Shocks is designed to deliver exceptional ground clearance and off-road capacity. It includes Fox shock technology to provide precision tuning and a smooth ride, while the adjustable DSC allows you to customize the performance of your shocks to match the terrain. With heavy-duty front and rear coils and 4" of added ride height, you can take the road less travelled and stand tall with confidence.

The Fox Shocks with DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail.

This mammoth kit includes:

  • Front & Rear Fox 2.5" Remote Reservoir Performance Elite Shocks with DSC
  • Front & Rear Coils
  • Diff Drop Kit
  • New Knuckles*

IMPORTANT NOTES

You must choose if you need the Standard Knuckles or Large Bore Knuckles.

  • Standard Knuckles are for factory 18" or 20" Wheels (Rebel or Laramie).
  • Large Bore Knuckles are for factory 22" Wheels (Limited).

Please make sure you order the correct kit.

FITMENT

  • To suit 2019+ Ram 1500 DT Models with Front & Rear Coils
  • This will not suit Air Suspension models
  • Will not fit Ram 1500 DS Classic models
  • View complete Vehicle Fitment Information 

SPECIFICATIONS

  • Front Lift Method : Cross-Member
  • Rear Lift Method : Coil Spring
  • Shocks Included : Yes
  • Front Lift Height : 4"
  • Rear Lift Height : 3"

TYRE & WHEEL COMBINATIONS

  • 35x12.5 w/ 18x9 & 4.5-5" back spacing
  • 35x12.5 w/ 20x9 & 4.5-5" back spacing
  • *Trimming may be required*
  • 17" and 18" wheels will NOT fit with these kits unless they are a Negative Offset (i.e. -12). A 0 offset is variable and more often than not, will not fit.
  • 20" wheels are recommended to clear the extended knuckle and tie rod end.

IMPORTANT NOTES

  • Fits 4WD models only
  • RAMs with factory 22" wheels require the larger bore knuckles due to larger wheel bearing assembly. Reference build code WPM or WPZ.
  • Will NOT fit adjustable "air ride" suspension equipped models.
  • 1/2" front high with the preload spacer installed. If the preload spacer isn't installed the truck will sit about 3/8" now low.
  • Stock 18" wheels cannot be reinstalled due to steering interference. Stock 20s can be reinstalled with factory tire size
  • Will NOT work on diesel models
  • Will NOT fit 2019-2022 RAM 1500 Classic models, Refer to the 2018 kit listings.
  • Will NOT fit models equipped with the Thermal Axle option. Reference build code DSK-P or check diff cover for cooling lines mounted as circled in image below.
  • IF USING 18IN WHEELS WITH MAXIMUM RECOMMENDED BACKSPACING, TEST FIT WHEELS ON VEHICLE BEFORE MOUNTING TIRES TO ENSURE CLEARANCE
  • If your vehicle has been modified with new leaf springs, the u-bolts with the Rear Spacer Block Kits may not be long enough. This lift kit is sold under the provision that the rear suspension has not yet been altered. If you need longer u-bolts, you may need to take the measurements and source some alternatives.

FITMENT

  • To suit 2019+ Ram 1500 DT Models with Front & Rear Coils
  • This will not suit Air Suspension models
  • Will not fit Ram 1500 DS Classic models
  • View complete Vehicle Fitment Information 

INSTALLATION

  • Installation Guide: Download
  • Estimated Time: 10 hours
  • Difficultly Level: Moderate

Related Products

Recently Viewed Products